Free Mitsubishi network head-stations for remote I/O until 31 March 2013
Mitsubishi Electric UK is giving away STlite CC-Link Head Stations free of charge to customers who purchase a CC-Link master module for either the FX3 or L Series PLCs. This unlimited offer is open until March 2013 for purchasers of FX3U-16CCL-M or LJ61BT11 modules.
Supporting CC-Link V2 enables FX or L Series PLC’s to connect to a huge variety of CC-Link enabled remote I/O, remote devices and intelligent device stations from over 250 manufacturers.
STlite is a flexible I/O solution for remote I/O networks. Approved for a wide range of applications, the STlite series features a variety of modules making it ideally suited for the requirements of today’s distributed fieldbus systems.
These modules provide a cost effective solution for applications requiring a noise-resistant, high speed device-level network and are the perfect partner to the new STlite CC-Link Head Station.
Go here to open the offer leaflet.
Go here to see more Mitsubishi Automation products at discounted prices
For more information on STLite see below
| Electronic modules | Description |
|---|---|
| Head station | |
| STL-PB1 | Head station Profibus DP/V1, 12 MBaud; digital and analog signals |
| STL-BT1 | Head station CC-Link, 156 kBaud–10 MBaud; digital and analog signals |
| STL-ETH1 | Head station ETHERNET TCP/IP ECO, 10/100 MBit/s; digital and analog signals |
| Power supply | |
| STL-PS | Power supply module 24 V DC, passive |
| STL-BPS | Power supply module 24 V DC, with bus power supply |
| Digital input module | |
| STL-DI8-V1 | Digital input module, 8 inputs, 24 V DC, 0.5 A, 0.2 ms, source type, 1-conductor connection |
| STL-DI8-V2 | Digital input module, 4 outputs, 24 V DC, 0.5 A, source type |
| Digital output module | |
| STL-DO4 | Digital output module, 4 outputs, 24 V DC, 0,5 A, source type |
| STL-DO8 | Digital output module, 8 outputs, 24 V DC, 0,5 A, source type |
| Relay output module | |
| STL-RO2 | Relay output module, 2 N/O contacts, 230 V AC/30 V DC, 2 A, potential-free |
| Analog input module | |
| STL-AD2-V | Analog input module, 2 voltage inputs, 0–10 V DC, single-ended |
| STL-AD2-I | Analog input module, 2 current inputs, 4–20 mA, single-ended |
| STL-AD4-V1 | Analog input module, 4 voltage inputs, 0–10 V DC, single-ended |
| STL-AD4-V2 | Analog input module, 4 voltage inputs, ±10 V DC, single-ended |
| STL-AD4-I | Analog input module, 4 current inputs, 4–20 mA, single-ended |
| STL-TI2 | Analog temperature input module, 2 temperature inputs, Pt-100 and resistormeasurement (selectable) |
| Analog output module | |
| STL-DA2-V | Analog output module, 2 voltage outputs, 0–10 V DC |
| STL-DA2-I | Analog output module, 2 current outputs, 4–20 mA |
| STL-DA4-V1 | Analog output module, 4 voltage outputs, 0–10 V DC |
| STL-DA4-V2 | Analog output module, 4 voltage outputs, ±10 V DC |
| STL-DA4-I | Analog output module, 4 current outputs, 4–20 mA |
| Encoder modules | |
| STL-ENC | Input module for incremental encoder |
| Counter Modules | |
| STL-C100 | Input module with forward/reverse counter, 24 V DC, 100 kHz |
| Interface module | |
| STL-SSI | Input module with SSI encoder interface, 24 bit, 125 kHz |
| System module | |
| STL-ET | Bus end module |
| Accessories | |
| STL-CClink con | CC-Link fieldbus connector for CC-Link head station, D-Sub plug, 9-pole |
Recent blog posts